6"-8" AIR GAP FOR DERINGER

The 6"- 8" 40/50 Air Gap Assembly will capture and evacuate mild water discharge from the Relieve Valve caused by daily fluctuation in system/supply pressure.

Air Gap Assembly will NOT capture and evacuate the maximum discharge caused by catastrophic valve or system failure. An auxiliary drain (separate and independent of the Air Gap Assembly) is REQUIRED and MUST be properly sized for the Maximum Relief Valve Discharge Rate (see specifications below).

This Air Gap assembly can be used on the Deringer 40/40G and 50/50G models and Magnum 40/40G model in sizes 6" through 8".

This Air Gap assembly can be used on:

• 6" Deringer 40X
• 6" Magnum 40X
• 6" Deringer 50X
• 8" Deringer 40
• 8" Magnum 40
• 8" Deringer 50
• 6" Deringer 40GX
• 6" Magnum 40GX
• 6" Deringer 50GX
• 8" Deringer 40G
• 8" Magnum 40G
• 8" Deringer 50G

6"- 8" 40/50 Air Gap Assembly includes:

• Air Gap Shield
• Air Gap Reducer
• Air Gap Bracket
• All Required Hardware